Messaggi errori al boot: come interpretarli e come risolverli (se possibile)

Non importa se ti serve una mano per partire o se vuoi un consiglio avanzato: gli utenti "del Pinguino" hanno una risposta per ogni necessità.
Regole del forum
Rispondi
Avatar utente
raffaele32
Livello: microSD (7/15)
Livello: microSD (7/15)
Messaggi: 357
Iscritto il: sab mag 04, 2013 5:42 pm
Località: Salerno (provincia)

Messaggi errori al boot: come interpretarli e come risolverli (se possibile)

Messaggio da raffaele32 »

Alla fine ho installato il kernel 4.19, quello compilato dalla Canonical, un pochino per upgrade, un pochino perché il pc era diventato lentissimo nel bootare (ho risolto la magagna post-installazione del kernel 4.19 con il comando sudo update-grub lvm), per cui sono rimasti dei messaggi di errori non risolti. Spero vivamente di non dovere reinstallare il tutto (a questo punto aspetto 18.04.2 oppure metto Gecko Linux Xfce). Lascio il dmesg che ho recuperato e quello che dovrebbe evidenziare gli errori (sperando di dover picchettare sulla tastiera):

Codice: Seleziona tutto

[    0.000000] Linux version 4.19.0-041900-generic (kernel@tangerine) (gcc version 8.2.0 (Ubuntu 8.2.0-7ubuntu1)) #201810221809 SMP Mon Oct 22 22:34:00 UTC 2018
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   NSC Geode by NSC
[    0.000000]   Cyrix CyrixInstead
[    0.000000]   Centaur CentaurHauls
[    0.000000]   Transmeta GenuineTMx86
[    0.000000]   Transmeta TransmetaCPU
[    0.000000]   UMC UMC UMC UMC
[    0.000000] Disabled fast string operations
[    0.000000] x86/fpu: x87 FPU will use FXSAVE
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ebff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009ec00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000003f36efff] usable
[    0.000000] BIOS-e820: [mem 0x000000003f36f000-0x000000003f3b5fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000003f3b6000-0x000000003f3cafff] reserved
[    0.000000] BIOS-e820: [mem 0x000000003f3cb000-0x000000003f3cbfff] usable
[    0.000000] BIOS-e820: [mem 0x000000003f3cc000-0x000000003f3e4fff] reserved
[    0.000000] BIOS-e820: [mem 0x000000003f3e5000-0x000000003f3f5fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000003f3f6000-0x000000003f413fff] reserved
[    0.000000] BIOS-e820: [mem 0x000000003f414000-0x000000003f416fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000003f417000-0x000000003f420fff] ACPI data
[    0.000000] BIOS-e820: [mem 0x000000003f421000-0x000000003f428fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000003f429000-0x000000003f60afff] reserved
[    0.000000] BIOS-e820: [mem 0x000000003f60b000-0x000000003f6effff] usable
[    0.000000] BIOS-e820: [mem 0x000000003f6f0000-0x000000003fffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed8ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: ASUSTeK COMPUTER INC. X101CH/X101CH, BIOS X101CH.1203 07/30/2012
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 1596.440 MHz processor
[    0.012786] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.012800] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.012837] last_pfn = 0x3f6f0 max_arch_pfn = 0x1000000
[    0.012851] MTRR default type: uncachable
[    0.012855] MTRR fixed ranges enabled:
[    0.012861]   00000-9FFFF write-back
[    0.012866]   A0000-BFFFF uncachable
[    0.012871]   C0000-CFFFF write-protect
[    0.012877]   D0000-E7FFF uncachable
[    0.012882]   E8000-FFFFF write-protect
[    0.012886] MTRR variable ranges enabled:
[    0.012892]   0 base 000000000 mask FC0000000 write-back
[    0.012898]   1 base 03F700000 mask FFFF00000 write-through
[    0.012904]   2 base 03F800000 mask FFF800000 uncachable
[    0.012908]   3 disabled
[    0.012911]   4 disabled
[    0.012914]   5 disabled
[    0.012918]   6 disabled
[    0.013189] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.029479] found SMP MP-table at [mem 0x000fcbd0-0x000fcbdf] mapped at [(ptrval)]
[    0.031047] Scanning 1 areas for low memory corruption
[    0.031050] initial memory mapped: [mem 0x00000000-0x173fffff]
[    0.031058] Base memory trampoline at [(ptrval)] 9a000 size 16384
[    0.031206] BRK [0x1703c000, 0x1703cfff] PGTABLE
[    0.031262] BRK [0x1703d000, 0x1703dfff] PGTABLE
[    0.031270] RAMDISK: [mem 0x31bed000-0x34dedfff]
[    0.031296] ACPI: Early table checksum verification disabled
[    0.031679] ACPI: RSDP 0x00000000000F0450 000024 (v02 ALASKA)
[    0.031692] ACPI: XSDT 0x000000003F417070 000064 (v01 _ASUS_ Notebook 01072009 AMI  00010013)
[    0.031710] ACPI: FACP 0x000000003F41FAF0 0000F4 (v04 ALASKA A M I    01072009 AMI  00010013)
[    0.031730] ACPI: DSDT 0x000000003F417168 008984 (v02 ALASKA A M I    00000000 INTL 20051117)
[    0.031744] ACPI: FACS 0x000000003F422F80 000040
[    0.031756] ACPI: APIC 0x000000003F41FBE8 000072 (v03 ALASKA A M I    01072009 AMI  00010013)
[    0.031769] ACPI: MCFG 0x000000003F41FC60 00003C (v01 ALASKA A M I    01072009 MSFT 00000097)
[    0.031783] ACPI: RTCF 0x000000003F41FCA0 000593 (v01 A1234  RTCONFIG 00000001 INTL 20051117)
[    0.031797] ACPI: HPET 0x000000003F420238 000038 (v01 ALASKA A M I    01072009 AMI. 00000005)
[    0.031811] ACPI: SSDT 0x000000003F420270 000655 (v01 PmRef  CpuPm    00003000 INTL 20051117)
[    0.031825] ACPI: SLIC 0x000000003F4208C8 000176 (v01 _ASUS_ Notebook 00000000      00000000)
[    0.031839] ACPI: BGRT 0x000000003F420A40 00003C (v00 ALASKA A M I    01072009 AMI  00010013)
[    0.031878] ACPI: Local APIC address 0xfee00000
[    0.031887] 128MB HIGHMEM available.
[    0.031892] 885MB LOWMEM available.
[    0.031895]   mapped low ram: 0 - 375fe000
[    0.031897]   low ram: 0 - 375fe000
[    0.031911] BRK [0x1703e000, 0x1703efff] PGTABLE
[    0.037503] Zone ranges:
[    0.037507]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.037513]   Normal   [mem 0x0000000001000000-0x00000000375fdfff]
[    0.037518]   HighMem  [mem 0x00000000375fe000-0x000000003f6effff]
[    0.037523] Movable zone start for each node
[    0.037525] Early memory node ranges
[    0.037529]   node   0: [mem 0x0000000000001000-0x000000000009dfff]
[    0.037532]   node   0: [mem 0x0000000000100000-0x000000003f36efff]
[    0.037535]   node   0: [mem 0x000000003f3cb000-0x000000003f3cbfff]
[    0.037539]   node   0: [mem 0x000000003f60b000-0x000000003f6effff]
[    0.037690] Reserved but unavailable: 3086 pages
[    0.037695] Initmem setup node 0 [mem 0x0000000000001000-0x000000003f6effff]
[    0.037701] On node 0 totalpages: 259058
[    0.037704]   DMA zone: 40 pages used for memmap
[    0.037707]   DMA zone: 0 pages reserved
[    0.037711]   DMA zone: 3997 pages, LIFO batch:0
[    0.037921]   Normal zone: 2175 pages used for memmap
[    0.037924]   Normal zone: 222718 pages, LIFO batch:63
[    0.049952]   HighMem zone: 32343 pages, LIFO batch:7
[    0.052377] Using APIC driver default
[    0.052866] ACPI: PM-Timer IO Port: 0x408
[    0.052877] ACPI: Local APIC address 0xfee00000
[    0.052924] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[    0.052953] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
[    0.052966] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.052972] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.052982] ACPI: IRQ0 used by override.
[    0.052989] ACPI: IRQ9 used by override.
[    0.053000] Using ACPI (MADT) for SMP configuration information
[    0.053010] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.053037] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.053126] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.053133] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
[    0.053137] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.053141] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.053145] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.053153] [mem 0x40000000-0xfebfffff] available for PCI devices
[    0.053157] Booting paravirtualized kernel on bare hardware
[    0.053169] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.053210] random: get_random_bytes called from start_kernel+0x81/0x48c with crng_init=0
[    0.053235] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
[    0.055473] percpu: Embedded 31 pages/cpu @(ptrval) s94284 r0 d32692 u126976
[    0.055498] pcpu-alloc: s94284 r0 d32692 u126976 alloc=31*4096
[    0.055504] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
[    0.055582] Built 1 zonelists, mobility grouping on.  Total pages: 256843
[    0.055590] Kernel command line: BOOT_IMAGE=/vmlinuz-4.19.0-041900-generic root=/dev/mapper/xubuntu--vg-root ro acpi_osi=! "acpi_osi=Windows 2009" quiet splash vt.handoff=1
[    0.057167] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.057704] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.058103] Initializing CPU#0
[    0.150674] Initializing HighMem for node 0 (000375fe:0003f6f0)
[    0.170738] Initializing Movable for node 0 (00000000:00000000)
[    0.188860] Memory: 886732K/1036232K available (9279K kernel code, 934K rwdata, 3556K rodata, 1100K init, 860K bss, 149500K reserved, 0K cma-reserved, 129372K highmem)
[    0.188875] virtual kernel memory layout:
                   fixmap  : 0xfff14000 - 0xfffff000   ( 940 kB)
                 cpu_entry : 0xffa00000 - 0xffb39000   (1252 kB)
                   pkmap   : 0xff600000 - 0xff800000   (2048 kB)
                   vmalloc : 0xf7dfe000 - 0xff5fe000   ( 120 MB)
                   lowmem  : 0xc0000000 - 0xf75fe000   ( 885 MB)
                     .init : 0xd6d8e000 - 0xd6ea1000   (1100 kB)
                     .data : 0xd690fe80 - 0xd6d79840   (4518 kB)
                     .text : 0xd6000000 - 0xd690fe80   (9279 kB)
[    0.188877] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.189337] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.189347] ftrace: allocating 39400 entries in 77 pages
[    0.241035] rcu: Hierarchical RCU implementation.
[    0.241040] rcu: 	RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
[    0.241043] 	Tasks RCU enabled.
[    0.241046] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.250682] NR_IRQS: 2304, nr_irqs: 456, preallocated irqs: 16
[    0.251055] CPU 0 irqstacks, hard=(ptrval) soft=(ptrval)
[    0.251151] spurious 8259A interrupt: IRQ7.
[    0.251206] Console: colour dummy device 80x25
[    0.251216] console [tty0] enabled
[    0.251934] allocated 1048576 bytes of page_ext
[    0.251963] ACPI: Core revision 20180810
[    0.252461] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.252486] hpet clockevent registered
[    0.252502] APIC: Switch to symmetric I/O mode setup
[    0.252506] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.253112] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[    0.272500] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x170301f8e33, max_idle_ns: 440795264114 ns
[    0.272530] Calibrating delay loop (skipped), value calculated using timer frequency.. 3192.88 BogoMIPS (lpj=6385760)
[    0.272538] pid_max: default: 32768 minimum: 301
[    0.272675] Security Framework initialized
[    0.272680] Yama: becoming mindful.
[    0.272741] AppArmor: AppArmor initialized
[    0.272868] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.272877] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.273476] Disabled fast string operations
[    0.273495] mce: CPU supports 5 MCE banks
[    0.273507] process: using mwait in idle threads
[    0.273520] Last level iTLB entries: 4KB 32, 2MB 0, 4MB 0
[    0.273524] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 8, 1GB 0
[    0.273825] Freeing SMP alternatives memory: 36K
[    0.284505] smpboot: CPU0: Intel(R) Atom(TM) CPU N2600   @ 1.60GHz (family: 0x6, model: 0x36, stepping: 0x1)
[    0.284505] Performance Events: PEBS fmt0+, Atom events, 8-deep LBR, Intel PMU driver.
[    0.284505] ... version:                3
[    0.284505] ... bit width:              40
[    0.284505] ... generic registers:      2
[    0.284505] ... value mask:             000000ffffffffff
[    0.284505] ... max period:             000000007fffffff
[    0.284505] ... fixed-purpose events:   3
[    0.284505] ... event mask:             0000000700000003
[    0.284505] rcu: Hierarchical SRCU implementation.
[    0.284505] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.284505] smp: Bringing up secondary CPUs ...
[    0.284505] CPU 1 irqstacks, hard=(ptrval) soft=(ptrval)
[    0.284505] x86: Booting SMP configuration:
[    0.284505] .... node  #0, CPUs:      #1
[    0.005412] Initializing CPU#1
[    0.005412] Disabled fast string operations
[    0.287827] CPU 2 irqstacks, hard=(ptrval) soft=(ptrval)
[    0.287827]  #2
[    0.005412] Initializing CPU#2
[    0.005412] Disabled fast string operations
[    0.292691] CPU 3 irqstacks, hard=(ptrval) soft=(ptrval)
[    0.292696]  #3
[    0.005412] Initializing CPU#3
[    0.005412] Disabled fast string operations
[    0.296516] smp: Brought up 1 node, 4 CPUs
[    0.296520] smpboot: Max logical packages: 1
[    0.296525] smpboot: Total of 4 processors activated (12771.52 BogoMIPS)
[    0.297591] devtmpfs: initialized
[    0.297591] PM: Registering ACPI NVS region [mem 0x3f36f000-0x3f3b5fff] (290816 bytes)
[    0.297591] PM: Registering ACPI NVS region [mem 0x3f3e5000-0x3f3f5fff] (69632 bytes)
[    0.297591] PM: Registering ACPI NVS region [mem 0x3f414000-0x3f416fff] (12288 bytes)
[    0.297591] PM: Registering ACPI NVS region [mem 0x3f421000-0x3f428fff] (32768 bytes)
[    0.297591] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.297591] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.297591] pinctrl core: initialized pinctrl subsystem
[    0.297591] RTC time: 23:34:26, date: 11/20/18
[    0.297591] NET: Registered protocol family 16
[    0.300909] audit: initializing netlink subsys (disabled)
[    0.300933] audit: type=2000 audit(1542756866.048:1): state=initialized audit_enabled=0 res=1
[    0.301061] EISA bus registered
[    0.301093] cpuidle: using governor ladder
[    0.301108] cpuidle: using governor menu
[    0.301368] ACPI: bus type PCI registered
[    0.301374] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.301575] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.301583] PCI: not using MMCONFIG
[    0.303776] PCI: Using configuration type 1 for base access
[    0.310658] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.310658] ACPI: Disabled all _OSI OS vendors
[    0.310658] ACPI: Added _OSI(Module Device)
[    0.310658] ACPI: Added _OSI(Processor Device)
[    0.310658] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.310658] ACPI: Added _OSI(Processor Aggregator Device)
[    0.310658] ACPI: Added _OSI(Linux-Dell-Video)
[    0.310658] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[    0.310658] ACPI: Added _OSI(Windows 2009)
[    0.325255] ACPI: 2 ACPI AML tables successfully acquired and loaded
[    0.331106] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.331871] ACPI: Dynamic OEM Table Load:
[    0.331871] ACPI: SSDT 0x00000000F62CE000 0002E9 (v01 PmRef  Cpu0Ist  00003000 INTL 20051117)
[    0.331871] ACPI: Dynamic OEM Table Load:
[    0.331871] ACPI: SSDT 0x00000000F62D4000 00091E (v01 PmRef  Cpu0Cst  00003001 INTL 20051117)
[    0.333304] ACPI: Dynamic OEM Table Load:
[    0.333319] ACPI: SSDT 0x00000000F58BD200 0001CF (v01 PmRef  ApIst    00003000 INTL 20051117)
[    0.333973] ACPI: Dynamic OEM Table Load:
[    0.333986] ACPI: SSDT 0x00000000F5885F00 00008D (v01 PmRef  ApCst    00003000 INTL 20051117)
[    0.338138] ACPI: EC: EC started
[    0.338140] ACPI: EC: interrupt blocked
[    0.338474] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as first EC
[    0.338481] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x1c, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.338486] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions
[    0.338488] ACPI: Interpreter enabled
[    0.338558] ACPI: (supports S0 S3 S4 S5)
[    0.338562] ACPI: Using IOAPIC for interrupt routing
[    0.338665] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.339198] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[    0.339200] PCI: Using MMCONFIG for extended config space
[    0.339213] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.339762] ACPI: Enabled 5 GPEs in block 00 to 1F
[    0.359547] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.359563] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.359699] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[    0.360643] PCI host bridge to bus 0000:00
[    0.360652] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.360657] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.360662] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.360667] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
[    0.360672] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000effff window]
[    0.360676] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window]
[    0.360682] pci_bus 0000:00: root bus resource [mem 0x3f800000-0x3fffffff window]
[    0.360686] pci_bus 0000:00: root bus resource [mem 0x40000000-0xfebfffff window]
[    0.360692] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.360714] pci 0000:00:00.0: [8086:0bf1] type 00 class 0x060000
[    0.361009] pci 0000:00:02.0: [8086:0be1] type 00 class 0x030000
[    0.361031] pci 0000:00:02.0: reg 0x10: [mem 0xdfc00000-0xdfcfffff]
[    0.361041] pci 0000:00:02.0: reg 0x14: [io  0xf0e0-0xf0e7]
[    0.361382] pci 0000:00:1b.0: [8086:27d8] type 00 class 0x040300
[    0.361434] pci 0000:00:1b.0: reg 0x10: [mem 0xdff00000-0xdff03fff 64bit]
[    0.361609] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.361887] pci 0000:00:1c.0: [8086:27d0] type 01 class 0x060400
[    0.362081] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.362368] pci 0000:00:1c.1: [8086:27d2] type 01 class 0x060400
[    0.362558] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.362842] pci 0000:00:1c.2: [8086:27d4] type 01 class 0x060400
[    0.363033] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    0.363321] pci 0000:00:1c.3: [8086:27d6] type 01 class 0x060400
[    0.363512] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.363798] pci 0000:00:1d.0: [8086:27c8] type 00 class 0x0c0300
[    0.363894] pci 0000:00:1d.0: reg 0x20: [io  0xf080-0xf09f]
[    0.364171] pci 0000:00:1d.1: [8086:27c9] type 00 class 0x0c0300
[    0.364264] pci 0000:00:1d.1: reg 0x20: [io  0xf060-0xf07f]
[    0.364552] pci 0000:00:1d.2: [8086:27ca] type 00 class 0x0c0300
[    0.364646] pci 0000:00:1d.2: reg 0x20: [io  0xf040-0xf05f]
[    0.364917] pci 0000:00:1d.3: [8086:27cb] type 00 class 0x0c0300
[    0.365010] pci 0000:00:1d.3: reg 0x20: [io  0xf020-0xf03f]
[    0.365292] pci 0000:00:1d.7: [8086:27cc] type 00 class 0x0c0320
[    0.365335] pci 0000:00:1d.7: reg 0x10: [mem 0xdff05000-0xdff053ff]
[    0.365489] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.365739] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[    0.366098] pci 0000:00:1f.0: [8086:27bc] type 00 class 0x060100
[    0.366514] pci 0000:00:1f.2: [8086:27c1] type 00 class 0x010601
[    0.366555] pci 0000:00:1f.2: reg 0x10: [io  0xf0d0-0xf0d7]
[    0.366573] pci 0000:00:1f.2: reg 0x14: [io  0xf0c0-0xf0c3]
[    0.366592] pci 0000:00:1f.2: reg 0x18: [io  0xf0b0-0xf0b7]
[    0.366610] pci 0000:00:1f.2: reg 0x1c: [io  0xf0a0-0xf0a3]
[    0.366629] pci 0000:00:1f.2: reg 0x20: [io  0xf000-0xf00f]
[    0.366648] pci 0000:00:1f.2: reg 0x24: [mem 0xdff04000-0xdff043ff]
[    0.366734] pci 0000:00:1f.2: PME# supported from D3hot
[    0.366982] pci 0000:00:1f.3: [8086:27da] type 00 class 0x0c0500
[    0.367076] pci 0000:00:1f.3: reg 0x20: [io  0x0800-0x081f]
[    0.367495] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.367684] pci 0000:02:00.0: [168c:002b] type 00 class 0x028000
[    0.367744] pci 0000:02:00.0: reg 0x10: [mem 0xdfe00000-0xdfe0ffff 64bit]
[    0.367948] pci 0000:02:00.0: supports D1
[    0.367953] pci 0000:02:00.0: PME# supported from D0 D1 D3hot D3cold
[    0.368021] pci 0000:02:00.0: 2.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s x1 link at 0000:00:1c.1 (capable of 7.876 Gb/s with 8 GT/s x1 link)
[    0.368252] pci 0000:00:1c.1: PCI bridge to [bus 02]
[    0.368266] pci 0000:00:1c.1:   bridge window [mem 0xdfe00000-0xdfefffff]
[    0.368441] pci 0000:00:1c.2: PCI bridge to [bus 03]
[    0.368647] pci 0000:04:00.0: [1969:2062] type 00 class 0x020000
[    0.368703] pci 0000:04:00.0: reg 0x10: [mem 0xdfd00000-0xdfd3ffff 64bit]
[    0.368723] pci 0000:04:00.0: reg 0x18: [io  0xe000-0xe07f]
[    0.368899] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.368957] pci 0000:04:00.0: 2.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s x1 link at 0000:00:1c.3 (capable of 7.876 Gb/s with 8 GT/s x1 link)
[    0.369167] pci 0000:00:1c.3: PCI bridge to [bus 04]
[    0.369177] pci 0000:00:1c.3:   bridge window [io  0xe000-0xefff]
[    0.369185] pci 0000:00:1c.3:   bridge window [mem 0xdfd00000-0xdfdfffff]
[    0.369237] pci_bus 0000:05: extended config space not accessible
[    0.369361] pci 0000:00:1e.0: PCI bridge to [bus 05] (subtractive decode)
[    0.369383] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7 window] (subtractive decode)
[    0.369388] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
[    0.369393] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[    0.369398] pci 0000:00:1e.0:   bridge window [mem 0x000c0000-0x000dffff window] (subtractive decode)
[    0.369403] pci 0000:00:1e.0:   bridge window [mem 0x000e0000-0x000effff window] (subtractive decode)
[    0.369408] pci 0000:00:1e.0:   bridge window [mem 0x000f0000-0x000fffff window] (subtractive decode)
[    0.369413] pci 0000:00:1e.0:   bridge window [mem 0x3f800000-0x3fffffff window] (subtractive decode)
[    0.369417] pci 0000:00:1e.0:   bridge window [mem 0x40000000-0xfebfffff window] (subtractive decode)
[    0.369475] pci_bus 0000:00: on NUMA node 0
[    0.370504] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[    0.370714] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 *5 6 7 11 12 14 15)
[    0.370917] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 *3 4 5 6 7 10 12 14 15)
[    0.371129] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 *7 11 12 14 15)
[    0.371332] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[    0.371535] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[    0.371738] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[    0.371953] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 *4 5 6 7 11 12 14 15)
[    0.372668] ACPI: EC: interrupt unblocked
[    0.372688] ACPI: EC: event unblocked
[    0.372703] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x1c, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.372708] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions and events
[    0.373032] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    0.373032] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.373032] pci 0000:00:02.0: vgaarb: bridge control possible
[    0.373032] vgaarb: loaded
[    0.373377] SCSI subsystem initialized
[    0.373433] libata version 3.00 loaded.
[    0.373433] ACPI: bus type USB registered
[    0.373433] usbcore: registered new interface driver usbfs
[    0.373433] usbcore: registered new interface driver hub
[    0.373433] usbcore: registered new device driver usb
[    0.373433] pps_core: LinuxPPS API ver. 1 registered
[    0.373433] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.373433] PTP clock support registered
[    0.373433] EDAC MC: Ver: 3.0.0
[    0.373433] PCI: Using ACPI for IRQ routing
[    0.387003] PCI: pci_cache_line_size set to 64 bytes
[    0.387106] e820: reserve RAM buffer [mem 0x0009ec00-0x0009ffff]
[    0.387112] e820: reserve RAM buffer [mem 0x3f36f000-0x3fffffff]
[    0.387116] e820: reserve RAM buffer [mem 0x3f3cc000-0x3fffffff]
[    0.387121] e820: reserve RAM buffer [mem 0x3f6f0000-0x3fffffff]
[    0.388512] NetLabel: Initializing
[    0.388512] NetLabel:  domain hash size = 128
[    0.388512] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.388512] NetLabel:  unlabeled traffic allowed by default
[    0.392919] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.392933] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[    0.395019] clocksource: Switched to clocksource tsc-early
[    0.440730] VFS: Disk quotas dquot_6.6.0
[    0.440776] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.441120] AppArmor: AppArmor Filesystem Enabled
[    0.441213] pnp: PnP ACPI init
[    0.441571] system 00:00: [io  0x0400-0x047f] has been reserved
[    0.441578] system 00:00: [io  0x0500-0x053f] has been reserved
[    0.441585] system 00:00: [io  0x04d0-0x04d1] has been reserved
[    0.441613] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.441763] pnp 00:01: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[    0.441947] pnp 00:02: Plug and Play ACPI device, IDs SYN0a13 PNP0f13 (active)
[    0.442456] system 00:03: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.442463] system 00:03: [mem 0x00000000-0x00003fff] could not be reserved
[    0.442469] system 00:03: [mem 0x00000000-0x00000fff] could not be reserved
[    0.442474] system 00:03: [mem 0x00000000-0x00000fff] could not be reserved
[    0.442480] system 00:03: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.442499] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.443064] system 00:04: [mem 0xfed14000-0xfed19fff] has been reserved
[    0.443071] system 00:04: [mem 0xe0000000-0xefffffff] has been reserved
[    0.443089] system 00:04: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.443571] system 00:05: [io  0x0400-0x047f] has been reserved
[    0.443577] system 00:05: [io  0x0500-0x053f] has been reserved
[    0.443584] system 00:05: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.443590] system 00:05: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.443596] system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.443602] system 00:05: [mem 0xfed20000-0xfed8ffff] could not be reserved
[    0.443608] system 00:05: [mem 0xffe00000-0xffffffff] has been reserved
[    0.443626] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.443638] pnp: PnP ACPI: found 6 devices
[    0.443644] PnPBIOS: Disabled
[    0.486176] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.486218] pci 0000:00:1c.0: bridge window [io  0x1000-0x0fff] to [bus 01] add_size 1000
[    0.486228] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 add_align 100000
[    0.486235] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 01] add_size 200000 add_align 100000
[    0.486254] pci 0000:00:1c.1: bridge window [io  0x1000-0x0fff] to [bus 02] add_size 1000
[    0.486261] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000
[    0.486279] pci 0000:00:1c.2: bridge window [io  0x1000-0x0fff] to [bus 03] add_size 1000
[    0.486286] pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000 add_align 100000
[    0.486292] pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff] to [bus 03] add_size 200000 add_align 100000
[    0.486312] pci 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04] add_size 200000 add_align 100000
[    0.486366] pci 0000:00:1c.0: BAR 14: assigned [mem 0x40000000-0x401fffff]
[    0.486385] pci 0000:00:1c.0: BAR 15: assigned [mem 0x40200000-0x403fffff 64bit pref]
[    0.486403] pci 0000:00:1c.1: BAR 15: assigned [mem 0x40400000-0x405fffff 64bit pref]
[    0.486413] pci 0000:00:1c.2: BAR 14: assigned [mem 0x40600000-0x407fffff]
[    0.486430] pci 0000:00:1c.2: BAR 15: assigned [mem 0x40800000-0x409fffff 64bit pref]
[    0.486448] pci 0000:00:1c.3: BAR 15: assigned [mem 0x40a00000-0x40bfffff 64bit pref]
[    0.486456] pci 0000:00:1c.0: BAR 13: assigned [io  0x1000-0x1fff]
[    0.486464] pci 0000:00:1c.1: BAR 13: assigned [io  0x2000-0x2fff]
[    0.486472] pci 0000:00:1c.2: BAR 13: assigned [io  0x3000-0x3fff]
[    0.486483] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.486490] pci 0000:00:1c.0:   bridge window [io  0x1000-0x1fff]
[    0.486501] pci 0000:00:1c.0:   bridge window [mem 0x40000000-0x401fffff]
[    0.486510] pci 0000:00:1c.0:   bridge window [mem 0x40200000-0x403fffff 64bit pref]
[    0.486523] pci 0000:00:1c.1: PCI bridge to [bus 02]
[    0.486530] pci 0000:00:1c.1:   bridge window [io  0x2000-0x2fff]
[    0.486541] pci 0000:00:1c.1:   bridge window [mem 0xdfe00000-0xdfefffff]
[    0.486550] pci 0000:00:1c.1:   bridge window [mem 0x40400000-0x405fffff 64bit pref]
[    0.486562] pci 0000:00:1c.2: PCI bridge to [bus 03]
[    0.486568] pci 0000:00:1c.2:   bridge window [io  0x3000-0x3fff]
[    0.486579] pci 0000:00:1c.2:   bridge window [mem 0x40600000-0x407fffff]
[    0.486588] pci 0000:00:1c.2:   bridge window [mem 0x40800000-0x409fffff 64bit pref]
[    0.486601] pci 0000:00:1c.3: PCI bridge to [bus 04]
[    0.486607] pci 0000:00:1c.3:   bridge window [io  0xe000-0xefff]
[    0.486617] pci 0000:00:1c.3:   bridge window [mem 0xdfd00000-0xdfdfffff]
[    0.486626] pci 0000:00:1c.3:   bridge window [mem 0x40a00000-0x40bfffff 64bit pref]
[    0.486640] pci 0000:00:1e.0: PCI bridge to [bus 05]
[    0.486664] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.486669] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.486674] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.486679] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff window]
[    0.486684] pci_bus 0000:00: resource 8 [mem 0x000e0000-0x000effff window]
[    0.486689] pci_bus 0000:00: resource 9 [mem 0x000f0000-0x000fffff window]
[    0.486694] pci_bus 0000:00: resource 10 [mem 0x3f800000-0x3fffffff window]
[    0.486699] pci_bus 0000:00: resource 11 [mem 0x40000000-0xfebfffff window]
[    0.486704] pci_bus 0000:01: resource 0 [io  0x1000-0x1fff]
[    0.486708] pci_bus 0000:01: resource 1 [mem 0x40000000-0x401fffff]
[    0.486713] pci_bus 0000:01: resource 2 [mem 0x40200000-0x403fffff 64bit pref]
[    0.486718] pci_bus 0000:02: resource 0 [io  0x2000-0x2fff]
[    0.486723] pci_bus 0000:02: resource 1 [mem 0xdfe00000-0xdfefffff]
[    0.486728] pci_bus 0000:02: resource 2 [mem 0x40400000-0x405fffff 64bit pref]
[    0.486733] pci_bus 0000:03: resource 0 [io  0x3000-0x3fff]
[    0.486737] pci_bus 0000:03: resource 1 [mem 0x40600000-0x407fffff]
[    0.486742] pci_bus 0000:03: resource 2 [mem 0x40800000-0x409fffff 64bit pref]
[    0.486747] pci_bus 0000:04: resource 0 [io  0xe000-0xefff]
[    0.486751] pci_bus 0000:04: resource 1 [mem 0xdfd00000-0xdfdfffff]
[    0.486756] pci_bus 0000:04: resource 2 [mem 0x40a00000-0x40bfffff 64bit pref]
[    0.486762] pci_bus 0000:05: resource 4 [io  0x0000-0x0cf7 window]
[    0.486766] pci_bus 0000:05: resource 5 [io  0x0d00-0xffff window]
[    0.486771] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.486776] pci_bus 0000:05: resource 7 [mem 0x000c0000-0x000dffff window]
[    0.486781] pci_bus 0000:05: resource 8 [mem 0x000e0000-0x000effff window]
[    0.486786] pci_bus 0000:05: resource 9 [mem 0x000f0000-0x000fffff window]
[    0.486791] pci_bus 0000:05: resource 10 [mem 0x3f800000-0x3fffffff window]
[    0.486796] pci_bus 0000:05: resource 11 [mem 0x40000000-0xfebfffff window]
[    0.487100] NET: Registered protocol family 2
[    0.487643] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes)
[    0.487662] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[    0.487707] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[    0.487764] TCP: Hash tables configured (established 8192 bind 8192)
[    0.487842] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.487861] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.487997] NET: Registered protocol family 1
[    0.488019] NET: Registered protocol family 44
[    0.488048] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.925487] pci 0000:00:1d.7: quirk_usb_early_handoff+0x0/0x6e7 took 425912 usecs
[    0.925530] pci 0000:04:00.0: [Firmware Bug]: disabling VPD access (can't determine size of non-standard VPD format)
[    0.925544] PCI: CLS 64 bytes, default 64
[    0.925699] Unpacking initramfs...
[    3.420022] Freeing initrd memory: 51204K
[    3.420149] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    3.420156] software IO TLB: mapped [mem 0x2dbed000-0x31bed000] (64MB)
[    3.420588] platform rtc_cmos: registered platform RTC device (no PNP device found)
[    3.420666] Scanning for low memory corruption every 60 seconds
[    3.422587] Initialise system trusted keyrings
[    3.422619] Key type blacklist registered
[    3.422791] workingset: timestamp_bits=14 max_order=18 bucket_order=4
[    3.428023] zbud: loaded
[    3.429419] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    3.430157] fuse init (API version 7.27)
[    3.430415] pstore: using deflate compression
[    3.435974] Key type asymmetric registered
[    3.435978] Asymmetric key parser 'x509' registered
[    3.436022] bounce: pool size: 64 pages
[    3.436069] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
[    3.436194] io scheduler noop registered
[    3.436198] io scheduler deadline registered
[    3.436395] io scheduler cfq registered (default)
[    3.438178] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    3.438395] vesafb: mode is 800x600x32, linelength=3200, pages=0
[    3.438398] vesafb: scrolling: redraw
[    3.438403] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    3.438441] vesafb: framebuffer at 0x3f800000, mapped to 0x(ptrval), using 1920k, total 1920k
[    3.466074] Console: switching to colour frame buffer device 100x37
[    3.493087] fb0: VESA VGA frame buffer device
[    3.493157] intel_idle: MWAIT substates: 0x3020220
[    3.493160] intel_idle: v0.4.1 model 0x36
[    3.493789] intel_idle: lapic_timer_reliable_states 0xffffffff
[    3.494051] ACPI: AC Adapter [AC0] (on-line)
[    3.494254] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    3.494281] ACPI: Power Button [PWRB]
[    3.494408] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[    3.494431] ACPI: Sleep Button [SLPB]
[    3.494571] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
[    3.494592] ACPI: Lid Switch [LID]
[    3.494720] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    3.494767] ACPI: Power Button [PWRF]
[    3.496619] thermal LNXTHERM:00: registered as thermal_zone0
[    3.496623] ACPI: Thermal Zone [TZ01] (69 C)
[    3.496931] isapnp: Scanning for PnP cards...
[    3.598169] battery: ACPI: Battery Slot [BAT0] (battery present)
[    3.807720] isapnp: No Plug & Play device found
[    3.808143] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    3.817221] Linux agpgart interface v0.103
[    3.823843] loop: module loaded
[    3.825297] libphy: Fixed MDIO Bus: probed
[    3.825302] tun: Universal TUN/TAP device driver, 1.6
[    3.825481] PPP generic driver version 2.4.2
[    3.825697] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    3.825716] ehci-pci: EHCI PCI platform driver
[    3.826027] ehci-pci 0000:00:1d.7: EHCI Host Controller
[    3.826046] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
[    3.826074] ehci-pci 0000:00:1d.7: debug port 1
[    3.830035] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
[    3.830074] ehci-pci 0000:00:1d.7: irq 23, io mem 0xdff05000
[    3.844836] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    3.845028] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
[    3.845034] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.845039] usb usb1: Product: EHCI Host Controller
[    3.845043] usb usb1: Manufacturer: Linux 4.19.0-041900-generic ehci_hcd
[    3.845047] usb usb1: SerialNumber: 0000:00:1d.7
[    3.845620] hub 1-0:1.0: USB hub found
[    3.845664] hub 1-0:1.0: 8 ports detected
[    3.846710] ehci-platform: EHCI generic platform driver
[    3.846766] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    3.846787] ohci-pci: OHCI PCI platform driver
[    3.846851] ohci-platform: OHCI generic platform driver
[    3.846893] uhci_hcd: USB Universal Host Controller Interface driver
[    3.847171] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    3.847197] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    3.847217] uhci_hcd 0000:00:1d.0: detected 2 ports
[    3.847277] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000f080
[    3.847500] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19
[    3.847506] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.847510] usb usb2: Product: UHCI Host Controller
[    3.847515] usb usb2: Manufacturer: Linux 4.19.0-041900-generic uhci_hcd
[    3.847518] usb usb2: SerialNumber: 0000:00:1d.0
[    3.848057] hub 2-0:1.0: USB hub found
[    3.848081] hub 2-0:1.0: 2 ports detected
[    3.848733] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    3.848749] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[    3.848765] uhci_hcd 0000:00:1d.1: detected 2 ports
[    3.848848] uhci_hcd 0000:00:1d.1: irq 21, io base 0x0000f060
[    3.849038] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19
[    3.849044] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.849048] usb usb3: Product: UHCI Host Controller
[    3.849052] usb usb3: Manufacturer: Linux 4.19.0-041900-generic uhci_hcd
[    3.849056] usb usb3: SerialNumber: 0000:00:1d.1
[    3.849583] hub 3-0:1.0: USB hub found
[    3.849608] hub 3-0:1.0: 2 ports detected
[    3.850154] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    3.850177] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[    3.850193] uhci_hcd 0000:00:1d.2: detected 2 ports
[    3.850273] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000f040
[    3.850460] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19
[    3.850465] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.850469] usb usb4: Product: UHCI Host Controller
[    3.850474] usb usb4: Manufacturer: Linux 4.19.0-041900-generic uhci_hcd
[    3.850478] usb usb4: SerialNumber: 0000:00:1d.2
[    3.850993] hub 4-0:1.0: USB hub found
[    3.851018] hub 4-0:1.0: 2 ports detected
[    3.851561] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[    3.851585] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[    3.851601] uhci_hcd 0000:00:1d.3: detected 2 ports
[    3.851681] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000f020
[    3.851874] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19
[    3.851880] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.851884] usb usb5: Product: UHCI Host Controller
[    3.851888] usb usb5: Manufacturer: Linux 4.19.0-041900-generic uhci_hcd
[    3.851892] usb usb5: SerialNumber: 0000:00:1d.3
[    3.852388] hub 5-0:1.0: USB hub found
[    3.852413] hub 5-0:1.0: 2 ports detected
[    3.853064] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    3.871044] serio: i8042 KBD port at 0x60,0x64 irq 1
[    3.871062] serio: i8042 AUX port at 0x60,0x64 irq 12
[    3.871675] mousedev: PS/2 mouse device common for all mice
[    3.872568] rtc_cmos rtc_cmos: RTC can wake from S4
[    3.872898] rtc_cmos rtc_cmos: registered as rtc0
[    3.872963] rtc_cmos rtc_cmos: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    3.872996] i2c /dev entries driver
[    3.873229] device-mapper: uevent: version 1.0.3
[    3.873503] device-mapper: ioctl: 4.39.0-ioctl (2018-04-03) initialised: dm-devel@redhat.com
[    3.873577] platform eisa.0: Probing EISA bus 0
[    3.873584] platform eisa.0: EISA: Cannot allocate resource for mainboard
[    3.873590] platform eisa.0: Cannot allocate resource for EISA slot 1
[    3.873595] platform eisa.0: Cannot allocate resource for EISA slot 2
[    3.873600] platform eisa.0: Cannot allocate resource for EISA slot 3
[    3.873605] platform eisa.0: Cannot allocate resource for EISA slot 4
[    3.873610] platform eisa.0: Cannot allocate resource for EISA slot 5
[    3.873615] platform eisa.0: Cannot allocate resource for EISA slot 6
[    3.873620] platform eisa.0: Cannot allocate resource for EISA slot 7
[    3.873625] platform eisa.0: Cannot allocate resource for EISA slot 8
[    3.873630] platform eisa.0: EISA: Detected 0 cards
[    3.873643] cpufreq_nforce2: No nForce2 chipset
[    3.873821] ledtrig-cpu: registered to indicate activity on CPUs
[    3.874698] NET: Registered protocol family 10
[    3.890814] Segment Routing with IPv6
[    3.890886] NET: Registered protocol family 17
[    3.891003] Key type dns_resolver registered
[    3.892013] microcode: sig=0x30661, pf=0x8, revision=0x10c
[    3.892243] microcode: Microcode Update Driver: v2.2.
[    3.892256] Using IPI No-Shortcut mode
[    3.892283] sched_clock: Marking stable (3890797962, 1412077)->(4106690732, -214480693)
[    3.892360] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[    3.893017] registered taskstats version 1
[    3.893063] Loading compiled-in X.509 certificates
[    3.904821] Loaded X.509 cert 'Build time autogenerated kernel key: 178280b30f9bcfd50dc9fe4d98f2ef17fcd5a310'
[    3.904888] zswap: loaded using pool lzo/zbud
[    3.919841] Key type big_key registered
[    3.919858] Key type trusted registered
[    3.927256] Key type encrypted registered
[    3.927276] AppArmor: AppArmor sha1 policy hashing enabled
[    3.927298] ima: No TPM chip found, activating TPM-bypass!
[    3.927312] ima: Allocated hash algorithm: sha1
[    3.927364] evm: Initialising EVM extended attributes:
[    3.927367] evm: security.selinux
[    3.927368] evm: security.SMACK64
[    3.927370] evm: security.SMACK64EXEC
[    3.927372] evm: security.SMACK64TRANSMUTE
[    3.927373] evm: security.SMACK64MMAP
[    3.927375] evm: security.apparmor
[    3.927376] evm: security.ima
[    3.927378] evm: security.capability
[    3.927381] evm: HMAC attrs: 0x1
[    3.928005]   Magic number: 10:6:606
[    3.928253] rtc_cmos rtc_cmos: setting system clock to 2018-11-20 23:34:30 UTC (1542756870)
[    3.936032] Freeing unused kernel image memory: 1100K
[    3.957001] Write protecting the kernel text: 9280k
[    3.957143] Write protecting the kernel read-only data: 3584k
[    3.957146] NX-protecting the kernel data: 7104k
[    3.958356] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    3.958512] Run /init as init process
[    4.180583] usb 1-4: new high-speed USB device number 2 using ehci-pci
[    4.440834] tsc: Refined TSC clocksource calibration: 1596.363 MHz
[    4.440855] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1702b93093d, max_idle_ns: 440795244581 ns
[    4.456259] clocksource: Switched to clocksource tsc
[    4.459079] atl1c 0000:04:00.0: version 1.0.1.1-NAPI
[    4.478922] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[    4.493541] ahci 0000:00:1f.2: version 3.0
[    4.494071] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[    4.494142] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0x3 impl SATA mode
[    4.494153] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pio slum part 
[    4.498718] scsi host0: ahci
[    4.500430] scsi host1: ahci
[    4.501150] scsi host2: ahci
[    4.503551] scsi host3: ahci
[    4.503874] ata1: SATA max UDMA/133 abar m1024@0xdff04000 port 0xdff04100 irq 24
[    4.503884] ata2: SATA max UDMA/133 abar m1024@0xdff04000 port 0xdff04180 irq 24
[    4.503888] ata3: DUMMY
[    4.503892] ata4: DUMMY
[    4.615433] atl1c 0000:04:00.0 enp4s0: renamed from eth0
[    4.656759] gma500 0000:00:02.0: GPU: power management timed out.
[    4.657446] pmd_set_huge: Cannot satisfy [mem 0x3f800000-0x3fa00000] with a huge-page mapping due to MTRR override.
[    4.659739] usb 1-4: New USB device found, idVendor=04f2, idProduct=b26f, bcdDevice=62.53
[    4.659746] usb 1-4: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[    4.659750] usb 1-4: Product: USB2.0 0.3M UVC WebCam
[    4.659754] usb 1-4: Manufacturer: Chicony Electronics Co., Ltd.
[    4.659758] usb 1-4: SerialNumber: 0x0001
[    4.682190] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    4.684942] ACPI Error: AE_AML_PACKAGE_LIMIT, Index (0x00000000B) is beyond end of object (length 0xB) (20180810/exoparg2-396)
[    4.685928] ACPI Error: Method parse/execution failed \OBQC, AE_AML_PACKAGE_LIMIT (20180810/psparse-516)
[    4.686739] ACPI Error: Method parse/execution failed \_SB.PCI0.GFX0.DD02._BQC, AE_AML_PACKAGE_LIMIT (20180810/psparse-516)
[    4.687697] ACPI Warning: Evaluating _BQC failed (20180810/video-622)
[    4.690429] acpi device:3c: registered as cooling_device4
[    4.690626] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7
[    4.691717] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    4.691720] [drm] No driver support for vblank timestamp query.
[    4.819720] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    4.820851] ata1.00: unexpected _GTF length (8)
[    4.821202] ata1.00: ATA-8: Hitachi HTS543232A7A384, ES2OA60W, max UDMA/133
[    4.821209] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 32), AA
[    4.822372] ata1.00: unexpected _GTF length (8)
[    4.822720] ata1.00: configured for UDMA/133
[    4.823162] scsi 0:0:0:0: Direct-Access     ATA      Hitachi HTS54323 A60W PQ: 0 ANSI: 5
[    4.824090] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    4.824140] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[    4.824197] sd 0:0:0:0: [sda] Write Protect is off
[    4.824203] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    4.824295] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    4.846354]  sda: sda1 sda2 < sda5 >
[    4.847807] sd 0:0:0:0: [sda] Attached SCSI disk
[    5.139561] ata2: SATA link down (SStatus 0 SControl 300)
[    5.377498] checking generic (3f800000 1e0000) vs hw (3f800000 7bf000)
[    5.377502] fb: switching to psbdrmfb from VESA VGA
[    5.377565] Console: switching to colour dummy device 80x25
[    5.378206] fbcon: psbdrmfb (fb0) is primary device
[    5.557366] random: fast init done
[    5.559524] psmouse serio1: synaptics: queried max coordinates: x [..5804], y [..5072]
[    5.618431] psmouse serio1: synaptics: queried min coordinates: x [1196..], y [866..]
[    5.730897] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.5, id: 0x1e0b1, caps: 0xf00073/0x240000/0xa2400/0x0, board id: 1928, fw id: 949913
[    5.801927] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6
[    5.832182] Console: switching to colour frame buffer device 128x37
[    5.866756] gma500 0000:00:02.0: fb0: psbdrmfb frame buffer device
[    5.881007] [drm] Initialized gma500 1.0.0 20140314 for 0000:00:02.0 on minor 0
[    5.951925] random: lvm: uninitialized urandom read (4 bytes read)
[    6.093433] random: lvm: uninitialized urandom read (2 bytes read)
[   38.140445] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
[   38.993505] random: crng init done
[   40.757616] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[   40.777208] systemd[1]: Detected architecture x86.
[   40.802276] systemd[1]: Set hostname to <raffaele-X101CH>.
[   45.166743] systemd[1]: Reached target Remote File Systems.
[   45.167874] systemd[1]: Created slice System Slice.
[   45.168301] systemd[1]: Listening on Journal Socket (/dev/log).
[   45.168662] systemd[1]: Listening on LVM2 poll daemon socket.
[   45.169072] systemd[1]: Listening on Journal Socket.
[   45.171696] systemd[1]: Starting Availability of block devices...
[   45.172782] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[   45.967363] systemd[1]: Started Journal Service.
[   46.279571] bpfilter: Loaded bpfilter_umh pid 335
[   46.592689] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro
[   47.372959] systemd-journald[326]: Received request to flush runtime journal from PID 1
[   48.461030] lp: driver loaded but no devices found
[   48.632008] ppdev: user-space parallel port driver
[   48.859923] Adding 2097148k swap on /mnt/2gb.swap.  Priority:-2 extents:14 across:3162112k FS
[   54.008190] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[   54.011610] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[   54.134901] asus_wmi: ASUS WMI generic driver loaded
[   54.168777] asus_wmi: Initialization: 0x0
[   54.168932] asus_wmi: BIOS WMI version: 0.9
[   54.169231] asus_wmi: SFUN value: 0x0
[   54.171849] input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input8
[   54.172204] asus_wmi: Number of fans: 1
[   55.991455] gpio_ich: GPIO from 462 to 511 on gpio_ich
[   56.087698] media: Linux media interface: v0.10
[   56.136994] ACPI Error: AE_AML_PACKAGE_LIMIT, Index (0x00000000B) is beyond end of object (length 0xB) (20180810/exoparg2-396)
[   56.137021] ACPI Error: Method parse/execution failed \STBR, AE_AML_PACKAGE_LIMIT (20180810/psparse-516)
[   56.137042] ACPI Error: Method parse/execution failed \OBLS, AE_AML_PACKAGE_LIMIT (20180810/psparse-516)
[   56.137059] ACPI Error: Method parse/execution failed \AMW0.DEVS, AE_AML_PACKAGE_LIMIT (20180810/psparse-516)
[   56.137080] ACPI Error: Method parse/execution failed \AMW0.WMBC, AE_AML_PACKAGE_LIMIT (20180810/psparse-516)
[   56.357493] videodev: Linux video capture interface: v2.00
[   56.632327] uvcvideo: Found UVC 1.00 device USB2.0 0.3M UVC WebCam (04f2:b26f)
[   56.661776] uvcvideo 1-4:1.0: Entity type for entity Processing 2 was not initialized!
[   56.661787] uvcvideo 1-4:1.0: Entity type for entity Camera 1 was not initialized!
[   56.661795] uvcvideo 1-4:1.0: Entity type for entity Extension 4 was not initialized!
[   56.662286] input: USB2.0 0.3M UVC WebCam: USB2.0  as /devices/pci0000:00/0000:00:1d.7/usb1/1-4/1-4:1.0/input/input9
[   56.662686] usbcore: registered new interface driver uvcvideo
[   56.662690] USB Video Class driver (1.1.1)
[   57.091717] ath: phy0: ASPM enabled: 0x42
[   57.091730] ath: EEPROM regdomain: 0x60
[   57.091733] ath: EEPROM indicates we should expect a direct regpair map
[   57.091739] ath: Country alpha2 being used: 00
[   57.091742] ath: Regpair used: 0x60
[   57.164482] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   57.165961] ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xf80a0000, irq=17
[   57.525124] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC269VB: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[   57.525133] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   57.525138] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[   57.525142] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[   57.525146] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[   57.525152] snd_hda_codec_realtek hdaudioC0D0:      Headset Mic=0x18
[   57.525156] snd_hda_codec_realtek hdaudioC0D0:      Internal Mic=0x12
[   57.741310] ath9k 0000:02:00.0 wlp2s0: renamed from wlan0
[   58.511824] input: HDA Intel Headset Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[   58.512180] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[   58.512579] input: HDA Intel HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[   65.166157] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem
[   65.177236] EXT4-fs (sda1): mounted filesystem without journal. Opts: (null)
[   65.787715] Adding 1036284k swap on /dev/mapper/xubuntu--vg-swap_1.  Priority:-3 extents:1 across:1036284k FS
[   67.826298] audit: type=1400 audit(1542756934.396:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=741 comm="apparmor_parser"
[   67.826320] audit: type=1400 audit(1542756934.396:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=741 comm="apparmor_parser"
[   67.826337] audit: type=1400 audit(1542756934.396:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=741 comm="apparmor_parser"
[   68.245102] audit: type=1400 audit(1542756934.816:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/ubuntu-core-launcher" pid=742 comm="apparmor_parser"
[   68.352732] audit: type=1400 audit(1542756934.924:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=737 comm="apparmor_parser"
[   68.352752] audit: type=1400 audit(1542756934.924:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=737 comm="apparmor_parser"
[   68.443274] audit: type=1400 audit(1542756935.012:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince" pid=739 comm="apparmor_parser"
[   68.443291] audit: type=1400 audit(1542756935.012:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince//sanitized_helper" pid=739 comm="apparmor_parser"
[   68.443303] audit: type=1400 audit(1542756935.012:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince-previewer" pid=739 comm="apparmor_parser"
[   68.443313] audit: type=1400 audit(1542756935.012:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince-previewer//sanitized_helper" pid=739 comm="apparmor_parser"
[   87.342980] IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not ready
[   87.367354] IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not ready
[   87.397829] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[   87.414725] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[   88.353439] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[   89.532645] wlp2s0: authenticate with d0:17:c2:30:46:34
[   89.547035] wlp2s0: send auth to d0:17:c2:30:46:34 (try 1/3)
[   89.549623] wlp2s0: authenticated
[   89.552654] wlp2s0: associate with d0:17:c2:30:46:34 (try 1/3)
[   89.556731] wlp2s0: RX AssocResp from d0:17:c2:30:46:34 (capab=0x431 status=0 aid=3)
[   89.556990] wlp2s0: associated
[   89.557236] ath: EEPROM regdomain: 0x8114
[   89.557240] ath: EEPROM indicates we should expect a country code
[   89.557242] ath: doing EEPROM country->regdmn map search
[   89.557245] ath: country maps to regdmn code: 0x37
[   89.557248] ath: Country alpha2 being used: DE
[   89.557251] ath: Regpair used: 0x37
[   89.557257] ath: regdomain 0x8114 dynamically updated by country element
[   90.879124] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
[    4.684942] ACPI Error: AE_AML_PACKAGE_LIMIT, Index (0x00000000B) is beyond end of object (length 0xB) (20180810/exoparg2-396)
[    4.685928] ACPI Error: Method parse/execution failed \OBQC, AE_AML_PACKAGE_LIMIT (20180810/psparse-516)
[    4.686739] ACPI Error: Method parse/execution failed \_SB.PCI0.GFX0.DD02._BQC, AE_AML_PACKAGE_LIMIT (20180810/psparse-516)
[   56.136994] ACPI Error: AE_AML_PACKAGE_LIMIT, Index (0x00000000B) is beyond end of object (length 0xB) (20180810/exoparg2-396)
[   56.137021] ACPI Error: Method parse/execution failed \STBR, AE_AML_PACKAGE_LIMIT (20180810/psparse-516)
[   56.137042] ACPI Error: Method parse/execution failed \OBLS, AE_AML_PACKAGE_LIMIT (20180810/psparse-516)
[   56.137059] ACPI Error: Method parse/execution failed \AMW0.DEVS, AE_AML_PACKAGE_LIMIT (20180810/psparse-516)
[   56.137080] ACPI Error: Method parse/execution failed \AMW0.WMBC, AE_AML_PACKAGE_LIMIT (20180810/psparse-516)

Codice: Seleziona tutto

[    4.684942] ACPI Error: AE_AML_PACKAGE_LIMIT, Index (0x00000000B) is beyond end of object (length 0xB) (20180810/exoparg2-396)
[    4.685928] ACPI Error: Method parse/execution failed \OBQC, AE_AML_PACKAGE_LIMIT (20180810/psparse-516)
[    4.686739] ACPI Error: Method parse/execution failed \_SB.PCI0.GFX0.DD02._BQC, AE_AML_PACKAGE_LIMIT (20180810/psparse-516)
[   56.136994] ACPI Error: AE_AML_PACKAGE_LIMIT, Index (0x00000000B) is beyond end of object (length 0xB) (20180810/exoparg2-396)
[   56.137021] ACPI Error: Method parse/execution failed \STBR, AE_AML_PACKAGE_LIMIT (20180810/psparse-516)
[   56.137042] ACPI Error: Method parse/execution failed \OBLS, AE_AML_PACKAGE_LIMIT (20180810/psparse-516)
[   56.137059] ACPI Error: Method parse/execution failed \AMW0.DEVS, AE_AML_PACKAGE_LIMIT (20180810/psparse-516)
[   56.137080] ACPI Error: Method parse/execution failed \AMW0.WMBC, AE_AML_PACKAGE_LIMIT (20180810/psparse-516)
System
System
Bot ufficiale TurboLab.it
Bot
Messaggi:
Iscritto il: sab dic 31, 2016 6:19 pm
Contatta: Contatta

Re: Messaggi errori al boot: come interpretarli e come risolverli (se possibile)

Messaggio da System » mer nov 21, 2018 8:06 pm


Avatar utente
Ganondolf
Livello: Disco fisso (9/15)
Livello: Disco fisso (9/15)
Messaggi: 674
Iscritto il: mar gen 28, 2014 10:51 am
Località: Mestre

Re: Messaggi errori al boot: come interpretarli e come risolverli (se possibile)

Messaggio da Ganondolf »

A parte mostrarti questi errori, funziona correttamente? Se si penso si possano ignorare se si presentano solo all'avvio. In alternativa, una possibile soluzione sarebbe quella di aggiornare il BIOS/UEFI
Avatar utente
CUB3
Moderatore
Moderatore
Messaggi: 3965
Iscritto il: lun gen 26, 2015 10:13 am

Re: Messaggi errori al boot: come interpretarli e come risolverli (se possibile)

Messaggio da CUB3 »

Pensavo di aver già risposto ma il mio messaggio sembra sparito... :s

Comunque sono d'accordo con Ganondolf!
Ganondolf ha scritto: gio nov 22, 2018 11:48 am A parte mostrarti questi errori, funziona correttamente? Se si penso si possano ignorare se si presentano solo all'avvio. In alternativa, una possibile soluzione sarebbe quella di aggiornare il BIOS/UEFI
"Let me tell you a secret: when you hear that the machine is “smart”, what it actually means is that it’s exploitable." Mikko Hypponen
Avatar utente
raffaele32
Livello: microSD (7/15)
Livello: microSD (7/15)
Messaggi: 357
Iscritto il: sab mag 04, 2013 5:42 pm
Località: Salerno (provincia)

Re: Messaggi errori al boot: come interpretarli e come risolverli (se possibile)

Messaggio da raffaele32 »

@CUB3 e @Ganondolf: il pc si avvia correttamente, nonostante i messaggi di errore. Quindi lascerò stare :grazie
System
System
Bot ufficiale TurboLab.it
Bot
Messaggi:
Iscritto il: sab dic 31, 2016 6:19 pm
Contatta: Contatta

Re: Re: Messaggi errori al boot: come interpretarli e come risolverli (se possibile)

Messaggio da System » ven nov 23, 2018 4:14 pm


Rispondi
  • Argomenti simili
    Risposte
    Visite
    Ultimo messaggio